back Auction Sniper

VKB Device Config

In addition to a PDF, VKB has online Help Center

VKBDevCfg-C.exe has random GUI elements for (mis)configuring VKB USB HID devices.
The top box should list VKB devices detected.  Select one...
The next section, about the same height, displays
based on selecting among 3 tabs:  Action | Tools | Settings |
The bottom (2/3 window) section changes based on selection among 5 bottom tabs.

With Action, Global, Common selected, my version displays this:


For Tools | Settings, second section displays:

Action

Get | Set move settings from | to the device.
Load | Save move settings from | to PC files.

Tools

Default is wanted for a new device or recovering from (mis)configuration.
Start Calibr | End Calibr are wanted to determine axes limits after Default.
Other "Tools" should be considered nearer weapons and avoided.

Settings

Options other than Auto Read Parameters, Short Device List
are presumably for bored or masochistic folks.

The bottom section

mostly about configuring VKB device control behaviors (e.g., for me) EVO R XT2
Terms and acronyms employed are not literally meaningful,
with actual significances rarely explained in single VKB PDF paragraphs
and too often never.  Some terms (dynamic, logical, virtual) are context-dependent...

Global | Common

Set SN: to other than 0000 for Windows to enumerate it consistently.

Global | External

Ignored for now...

Analog triggers for X360CE

Profile | Axes

NXT EVO lacks real axes 7 and 8
Configure them as Axes without center to emulate XBox triggers
(uncheck Cn column):


Axis #8 Trimmer Options match:

Source AUX trims an Axis using buttons or encoder
as opposed to trimming via another axis, physical or logical.

Profile | Buttons

Reconfigure two buttons (in yellow) as Trim Auto Axes 7 and 8.
64x is (quick) speed at which values ramp from 0 to 100% and back


Red button for axis 7 is configured similarly to Trigger:
maintained by blekenbleu