Somnium VR1 face mask options

VR1 face mask does not magnetically attach

instead, six M1.5 hex socket screws under velcroed cushion

Some folks want a shallower facemask frame for more FoV

Somnium Space VR discord #3d-mods-for-vr1 Thinner Face gasket.

My cheek bones are too prominent for Somnium's face mask

massive light leaks around the nose unless strap is really tight...
even then, problematic light leaks at the temples
and much lost motion from VR1 inertia during moderate head turns.
I have been putting off and dreading 3D print design, sigh

Perhaps because of high tension, VR1's head strap creaks for me a lot.

A VRCOVER velour face cushion, originally for Samsung Odyssey,
is flexible enough to "droop" its cheek ends out of the way:

providing more relief, but not enough to engage VR1 nose flaps.
Still far too slack at temples...

Best visuals want VR1 nose piece firmly against my nose.

I currently wear VR1 without mask, hanging from BOBOVR M2.

Because wider. the Studioform cushion (VRFSG uses)
resists being distorted like that VRCOVER.

With a face mask shape better conforming to my brow,
temples and cheeks, it seems likely to be comfy.

Somnium face mask .step   Somnium's converted to STL

@Jackblack's Thinner Face mask STLs (3D printable)

Suitable for VROptician Inserts

- this STL version is closer to cheekbones:

  slightly tilting forehead part more to the face
  and enough space to use with VROptician inserts.